Detail question regarding BT1114QI and UART implementation

hk111

I am Building a project and there does not seem to be a programming guide for this specific Module so I ask here:

Does BT1114QI report AVRCP absolute volume changes over UART?

Thanks for any helpful answer in advance!

FAE_Gavin

hk111 Yes, BT1114QI supports reporting AVRCP absolute volume changes via UART from firmware version V1.1.1 and later.

For BT1114QI, please refer to the general audio AT command manual for UART implementation and related commands:
https://document.feasycom.com/docs/audio/BTAUD_QCC_EN/latest/

hk111

Hi! Thank you for the quick reply- that is a good startingpoint.

However the linked manual states receiving modules BT1038x, BT1058-RX, BT1104QI and BT1026X as well as transmitting modules BT1035, BT6038 and BT1058-TX.

„My“ BT1114QI is not listed as applicable. Is that an oversight of the manual?

FAE_Gavin

hk111 Hi hk111,

Thanks for pointing this out. You are right, BT1114QI is not listed in the document yet.

This is a documentation oversight. BT1114QI uses the same QCC audio AT command framework, and the BTAUD_QCC_EN manual is applicable to BT1114QI as well.

We will update the module list accordingly.