FSC-BT1058 Name

How can I change the name in the FSC-BT1058 module in Auracast mode?

Igor Please refer to the following AT commands to change the Bluetooth name of the module.

For Classic Bluetooth (BR/EDR), use:
AT+NAME=<name>[,suffix_mode]
Suffix mode options:

Example: AT+NAME=ABC,0sets the name to "ABC" without a suffix.

For BLE Bluetooth, use:
AT+LENAME=<name>[,suffix_mode]
Suffix mode options:

Example: AT+LENAME=ABC,1 sets the name to "ABC-XXXX".

To check the current name, simply send AT+NAME or AT+LENAME without any parameters. The name must be 1–29 ASCII characters long.

We have already tried these commands.
But the problem is that the Auracast receiver sees the name of the module.

          I have executed the following commands on the FSC-BT1058 transmitter:

AT+NAME

<<
+NAME=iags-FF01

AT+LENAME

<<
+LENAME=iags_le-FF01

          But the FSC-BT1038 receiver detects Auracast broadcast:

AT+BISSCAN=5

<<
OK

+BISSTAT=2

+BIS=1,-47,14,61630,00025B00FF01,FSC-BT1058-FF01

+SCAN=E

        What should I do to make the receiver detect the assigned name?

Igor The feature to modify the Auracast broadcast name has not been enabled on the BT1058 yet.

When will this function be added to the BT1058 module? We need this functionality for future module orders.

Igor A version is expected to be released at the end of the month to resolve the issue.

Thank You